Item | Unit | IPM7735 | IPM7745 | IPM7763 | ||
Travel Size | X | mm | 350 | 450 | 630 | |
Y | mm | 450 | 550 | 800 | ||
Worktable | Size | mm | 470*720 | 580*820 | 750*1150 | |
Loading | kg | 400 | 500 | 1200 | ||
Max. Cut Thickness | mm | 500 | 500 | 700 | ||
Wire Dia.: | mm | φ0.2-φ0.45 | φ0.2-φ0.45 | φ0.2-φ0.45 | ||
Handle remoter step distance | mm | 4 | 4 | 4 | ||
Acurracy | mm | 0.015 | 0.015 | 0.015 | ||
Finishing Roughness | Ra 1.0 | Ra 1.0 | Ra 1.0 | |||
Step Motor | 90BF006 | 90BF006 | 90BF006 | |||
Max.Speed | mm2/min | 120 | 120 | 120 | ||
Power | KVA | 2 (380V 50Hz) | 2 380V | 3phase | ||
Machine | Weight | kg | 1320 | 1620 | 3080 | |
Size | mm | 1550*1150*1750 | 1700*1250*1850 | 2160*1950*2250 | ||
Item | Description | Remark |
|
Software HL | |
|
Graphic tracking | |
|
Any angle changing | |
|
Symmetrical cutting | |
|
Wire-broken protect | |
|
Auto-shut after working | |
|
U Disc Available | |
|
Forward and reverse processing | |
|
Simulating processing | |
|
Power-off protector | |
|
AUTOCAD,DXF file and ISOG file available of exchanged |
-
CNC diamond wire cutting machine IPM7745 graphite jade ceramics cutting reciprocating cnc abrasive wire cutting machine
This Machine is widely used for cutting graphite electrods and shaping epoxy board,hard alloy materials,marble,jade,optical glass,ceramic,ferrite,semiconductor,silicon carbide,refractory bricks etc.
The machine tool is the top choice for processing jade and emerald with low loss, which is recognize by users.