Project | Content | Unit | Parameter | |
Ability |
Maximum turning diameter on the bed | mm | Φ500 | |
Maximum turning diameter on the cross slide | mm | Φ290 | ||
Center distance(maximum workpiece length) | mm |
750 |
||
Maximum workpiece turning length | mm | 650 | ||
Bed width | mm | 400 | ||
Spindle |
Range of rotation | Manual second gear | r/min |
Low gear150-400 High gear600-1600 |
Totally stepless | 200-2000 | |||
Spindle head/spindle through hole diameter | mm | A2-8, 82 | ||
Chuck Form | mm | Ordinary chunk Φ250 | ||
Journey | X/Z axis maximum travel | mm | X:295, Z:same as “Maximum workpiece turning length” | |
Tool holder | Tool holder form | mm | Standard:Vertical four-station | |
Knife size | 25×25 | |||
Tailstock |
Tailstock form | Standard:ordinary manual selection::Hydraulic,pneumatic | ||
Sleeve diameter/stroke/bore taper | mm | Φ55/150/MohS 5 | ||
Precision |
Repeatability | mm |
X axis≤0.005mm Z axis≤0.01mm |
|
Surface Roughness(steel) | ≤Ra1.6 | |||
Structure | Using HT300 plus copper castings,the bed and foot of the bed are integrally cast without gaps | |||
Motor |
Manual second gear | KW |
Standard: common7.5, Select: Servo7.5 |
|
Totally stepless | ||||
X/Z axis feed motor | N.m | 4/6 | ||
Other |
Dimensions(L×W×H) | mm | 2200/2450/2950*1450*1750 | |
Net weight | kg | 1800/2000/2200 | ||
CNC system | SIEMENS 808D |